AJA Ki Pro Rack digitaler Rekorder
ab 4122.71 EUR
AJA Ki Pro Rack digitaler RekorderDie Alternative zur BandmaschineWechseln Sie schnell und einfach vom Tape zum datenbasierten WorkflowWenn man vom Tape weg will, bietet das Ki Pro Rack genau die Aufnahme- und Abspielmöglichkeiten, die man sich von einem kompakten Gerät in 1RU Größe wünscht und mehr leistet als ein gewöhnlicher Videorecorder. Über die Netzwerkverbindung können Daten bequem über Ethernet mit dem Ki Pro Rack ausgetauscht werden. Auch die komplette Steuerung und Konfiguration ist über das Netz möglich. Leichte IntegrationDas Ki Pro Rack passt zu Ihrer vorhandenen Verkabelung. Alle Anschlüsse entsprechen professionellen Standards: SDI, HDMI und analog Video, AES, analog und embedded Audio, LTC Ein/Ausgang, RS-422 Unterstützung, Genlock und LAN Netzwerkanbindung.Standalone BetriebJeder, der mal ein Tapedeck bedient hat, wird mit dem Ki Pro Rack keine Probleme haben. Bedienelemente auf der Frontseite und ein intuitives Benutzerinterface ermöglichen den standalone Betrieb und beschleunigen Ihren Produktionsablauf.Schnellere ProduktionWer High-Quality Apple Pro-Res und Avid DNxHD direkt auf die Ki Pro Rack Storagemodule aufnimmt, spart sich das zeitraubende Loggen und Digitalisieren vom Tape. Alle Daten sind sofort im Schnitt nutzbar. Technische Daten Video Input Digital 1 Channel, selectable input SD and HD-SDI (2xBNC), SMPTE-259/292/296 HDMI Video Input Analog SD/HD Component (3xBNCS): SMPTE/EBU N10, Betacam 525 line, Betacam 525J, YPbPr 12-bit A/D, 2x oversampling Video Output Digital SD and HD-SDI, SMPTE-259/292/296 (1xBNC), HDMI Video Output Analog Composite (1xBNC): NTSC, NTSCJ, PAL 12-bit D/A, 8x oversampling; SD/HD Component (3xBNCs): SD: SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB 12-bit D/A, 8x oversampling HD: YPbPr, RGB 12-bit D/A, 2x oversampling Audio Input Digital AES 24-bit, 8 channel, 48kHz (4xBNC) 24-bit SDI embedded audio, 8 channel, 48kHz HDMI embedded, 2 channel Audio Input Analog 24-bit A/D, 2 channel balanced (2 XLR), 48kHz Input level Line Audio Output Digital AES 24-bit, 8 channel, 48kHz (4xBNC) 24-bit SDI embedded audio, 8 channel, 48kHz HDMI embedded, 2 channel Audio Output Analog 24-bit D/A, 2 channel balanced XLR, 48kHz Network 10/100/1000 Ethernet (RJ45), Embedded webserver for remote control Panel User Interface 2 × 20 character display, with dedicated buttons Timecode LTC timecode input and output via BNC SDI embedded RP188 timecode On-screen timecode display on SDI 2 output Serial Port RS-422 (slave pinout), 9-pin (available beginning with version 2.0 firmware)? Connector pinout is as follows: 1 GND, 2 TX, 3 RX +, 4 GND, 5 No Connection, 6 GND, 7 TX +, 8 RX, 9 GND, Shell GND Hardware up conversion - 10-bit Anamorphic: full-screen, Pillar box 4:3: results in a 4:3 image in center of screen with black sidebars, Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars, Zoom Letterbox: image zoomed to fill screen, Zoom Wide: combination of zoom and horizontal stretch to fill 16:9 screen; this setting can introduce a small aspect ratio change Hardware down conversion - 10-bit Anamorphic: full-screen, Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved, Crop: image is cropped to fit new screen size Hardware cross conversion - 10-bit 1080i to 720P, 720P to 1080i Storage Module drive bays 2 (each with eject button and select LED) Physical Height: 1.75 (4.45cm), Width: 19 (48.26cm), Depth: 12.5 front panel to the back of the deepest connector (37.75cm) Temperature Operating Temperature Range: 5C to 40C, Safe Storage Temperature Range (power OFF): -20C to 60C Power Voltage: 100-240 VAC Typical operating power 40W
